The Edge – 3500mm x 4700mm

Base unit external footprint size - 3500mm x 4400mm with a 300mm Overhang

Pent Roof - 2500mm at the front sloping to 2300mm at the rear

EPDM RUBBER ROOF - Due to its composition, essentially EPDM polymers and carbon black,  EPDM offers unmatched resistance to ozone, UV radiation, and ultimately ageing. EPDM remains flexible at temperatures down to -45 degrees and can elongate over 300% to accommodate building movements and temperature fluctuations.EPDM requires little or no maintenance. This feature combined with the inherent durability and competitive installed cost of EPDM roofing systems, result in a very low life-cycle cost.

FRAME - C16 CLS 40MM X 76MM - (see below for alternative options)

PURLINS - C24/26 (4x2)/(6x2) inch (Pressure tested dry graded)

FRAMING FIXINGS - Heavy duty twin thread Zinc 100mm fixings

PLINTH/RING BEAM - 60mm x 40mm” High pressure treated Redwood sleepers to ensure maximum life span and substantial floor support

EXTERIOR CLADDING - Imported Scandinavian Western Red Cedar tantalised half-lap - 18mm - Applied with 40mm ring-shank coil nails. 18 points along the clad

PLINTH BEARERS - (Ensurers full life of shed by lifting untreated framing timbers off the ground) - Pressure treated red wood ring-bead tailor machined to fit your specific building size. Fully supported floors can now be added to orders with this option selected

GROUND ANCHOR KIT - (Thunder bolts concrete screws secured into the concrete 175mm mm fixings) - Secures building to the concrete floor & now means the building can be damp sealed -  Ask for more information. Ground anchor kits are required on all porch/overhang upright posts to ensure position fixture.

HEAVY DUTY FLOOR - Marine ply with tanalised load bearing support timbers (18mm boarding as standard)

BREATHABLE DAMP COURSE FRAME SHIELD MEMBRANE - Made of high density polyethylene fibres for long-term protection against the elements. This durable, lightweight breathable membrane is wind tight and water resistant and designed for use in new build, refurbishment or extension projects. Highly permeable to water vapour – can be fixed directly to insulation (Sd-value: 0.01m). Enhances the airtightness of the construction / Long-term reliability / CE marked / Fully BBA, IAB, and UKAS approved / BBA certificate: 90/2548

INTERNAL INSULATION - 30mm Celetex - Applied to all walls and ceiling

EXTERNAL ROOF BOARDING - 18mm 2397 x 1197 Kronospan OSB3

INTERNAL BOARDING - 9mm Moisture resistant MDF - Applied to side walls and ceiling

INTERNAL REAR FEATURE WALL - Light cascade grey panelling

PVC DOORS - Open out French - Anthracite Grey - 2000mm (H) x 1700mm (W) 

PVC WINDOWS - Solid pane - Anthracite Grey - 2000mm (H)  x 1000mm (W) - X3

CORNER TRIM KIT - Anthracite Grey

INSTALLATION - UK mainland only

ELECTRICAL PACK NOT INCLUDED - Your options for this can be discussed with a member of our team, please contact us if you would like further information regarding the electrical packs we offer

DELIVERY NOT INCLUDED - Please see below 

Delivery is charged at £2.50 per mile, one way from our Shropshire workshop to your address. Once you have placed your order you will need to send us a message with your full address, post code, contact telephone number and email address, we will then notify you of the additional delivery charge.

All of our buildings are made to order therefore the lead time from order confirmation to delivery is currently 6 weeks